- OUR TEL
021-59885896 - E-MAIL
sales@shrollformer.com - OUR FAX
021-59885896
Home > Drywall profile machine
90M per min Automatic Change Stud and Track Roll Forming Machine for produce UW CW_EU and CW_IT
Working flow: Double head hydraulic decoiler- Automatic change roll forming machine- Double shear cutting system-Europe hydraulic station-Big control system control
| 90M per min good quality Automatic Change Stud and Track drywall metal profile rol forming machine | |||
| No | Item | Unit | Qty |
| 1 | Double Head Hydraulic De-Coiler | No | 1 |
| 2.1 | Roll-Forming Machine Base | No | 1 |
| 2.2 | Automatic change profile system | NO | 1 |
| 2.3 | Introduction and Lubricating Unit | No | 1 |
| 7 | Dobule Wagon Cutting and punching Unit | No | 1 |
| 8 | Cutting Dies for UW and CW_EU & Special Cutting Die for CW_IT Profile | No | 1 |
| 9 | Hydraulic Unit | No | 1 |
| 10 | Electric control system (PLC) | No | 1 |
| 11 | Safety Guards, Fences and protection system for all units | LS | 1 |
| 12 | Additional sensors | LS | 1 |
| 13 | Documentation | LS | 1 |
| 14 | CE Certification | LS | 1 |
| 15 | Training | LS | 1 |
Feature: 1.Hydraulic expation 2.Double head 3ton*2pc
Feature: 1. Servo adjust web 2. Servo adjust height
Feature: 1.cutting speed 90m per min 2.Punching speed 80m per min
Feature: Tai wan Hydraulic station
Feature: shear speed is 90M per min tolerance is 0.5mm per 1000mm
DRYWALL METAL PROFILES & SPECIFICATIONS STEEL SPECIFICATIONS
Our Metal Sections are manufactured using hot dipped zinc coated steel-Z180 & Z275 STUDS
Studs are the Primary sections used in the Drywall & Lining Systems.Studs used in Vertical condition at appropriate centers to match the structural stability based on the design. Studs are fixed between the Base & Head Track, Screwed only with the Base track & Friction fit at the Head Track.
Material thickness 0.55-1.00mm
Wed size;50/75/100/125/150mm
Flange:34/36mm
Length:3000mm & Customized Length
Deflection Tracks are used at the top as Head Tracks. Which helps to allow the partitions, when needs a movement (up, down) within the structure at the head of a partition. Deflection Tracks Secured with appropriate anchors at Concrete Slab & Hold the studs in position and it helps in aligning the Boards.
Thickness:0.80,&0.90 mm
Width::50,64,70,75,90,100,125&150mm
Flange:50mm
Length::3000mm
Tracks are the Secondary sections used in the Drywall & Lining Systems. Tracks used in Horizontal condition & Secured with appropriate anchors at Floor Slab & Soffit. Tracks Hold the studs in position and it helps in aligning the Boards.
Thickness:0.55,0.60,0.80,0.90,1.20 & 1.50 mm :
Witth :50,64,70,75,90,100,125 & 150 mm
Flange:30mm
Length:3000mm
| 90M per min good quality Automatic Change Stud and Track drywall metal profile rol forming machine | |
| Model | QCU-AHS90 |
| Profile | EU 50-150 CW_EU 50-150 CW_IT 50-150 |
| Drive system | Reducer |
| Shear system | 2 |
| Shaft diameter | 50mm |
| Wall frame gap | 300mm |
| Cutting Speed | 90M/min |
| Punching speed | 60M/min |
| Material thickness | 0.4-0.9mm |
| Tolerance | 0.5mm |
stud and track profile roll forming machine which can produce 50/75/100/125/150mm web stud and track profile
SIHUAProfessonalhighspeedhighprecsionstudandtrackrollformingmachinepopularsellinmanycountries,commonthicknessbetween0.4-0.9mm,Thismachinecuttingoffspeedis120Mpermin,Punchingholespeedis80MPermin,the120Mperminma
Working speed is 90M per min shear cutting off stud and track roll forming machine
Language
