Home > Struct Roll Forming Machine
C profiles drawing
C RAIL material thickness 2.0 mm
Production speed
Product speed is 30Mper min -20M/min Product thickness is 1mm-2.00mm-2.5.00mm
Product length tolerance L+-1mm
Total power:45.4kw
Voltage: 380v 3-phase 50hz | Motor in roll forming machine:30KW*1PC | Motor in hydraulic station | power is 11kw | Servo motor is 4.4kw
Introduction
Production process:De-coiler →lever and feeder → press machine(contain punching die)→roll forming profile →cutting table →packing table (hydraulic system given power) all parts were control by electrical control system
Quality C metal rack pallet upright support profiles roll forming machine | |||
No | Item | Unit | Qty |
1.1 | Hydraulic de-coiler | No | 1 |
1.2 | Straightener | No | 1 |
1.3 | Servo feeder | No | 1 |
2.1 | Press machine Capacity is 125 ton | No | 1 |
2.2 | Punching die | No | 1 |
3 | C 38*40 roll forming machine Product speed 30-50m per min | No | 1 |
4 | Cutting unit,Speed 15-30M per min | No | 1 |
6 | Hydraulic system | No | 1 |
7 | Electric control system | No | 1 |
8 | Packing table | No | 1 |
Load capacity:4 ton with loading carriage Material : 2mm ,S 235 JR
Material width: 450MM
feed pitch accuracy is +-0.15mm, Brand of PLC is Mitsubishi Servo motor power is 2.9 kw, brand is YASKAWA
Capacity is 125 ton YANGLI JH21-125
1. Hydraulic pump flow:50L/min TAIWAN 2. Motor power:11KW;SIEMENS 3. Hydraulic solenoid value number:2set, SIHUA 4. Hydraulic accumulator capacity 30L 5、Tank volume:220L.
1. Guide rail brand: TBI 2. Cylinder:ARITAC 4.cutter frame 1 unit 5.cutting unit base 6.Big oil cyclinder 7.cutting die 1sets and die frame .Material:SKD11 vacuum heat treatment
1. Encoder:OMRON(Japanese brand) 2. Frequency motor30KW(NIDEC)JAPAN 3. PLC:Siemens(German brand) 4. Human interface:Siemens 5. Relay: OMRON(Japanese brand)
Product advantages
1.Easy to operate
2.High production speed
3.Stable and durable
4.Has a wide range of uses